Press the “Start” button.
The “Start” indicator light will come on.
Turn the programme selector to the
“Stop” position.
Switch the appliance off by pressing
the “On/Off” button.
The water hardness level is now stored
in memory.
Setting the water hardness level se-
lector in the wash cabinet
The water hardness level selector in the
wash cabinet must be set according to
the table below.
Setting the selector to the correct set-
ting will help minimise the effects of the
wash process on glass surfaces. Too
high a setting will lead to poor cleaning
results and an increase in water spots
left on crockery and cutlery.
Use a screwdriver to take the cover
off the water hardness level selector
in the wash cabinet.
Use a coin or screwdriver to adjust
the water hardness level selector in
the wash cabinet. There is a click as
each setting is reached.
°d
mmol/l
°f
Selector setting
(level)
1- 7
0.2 - 1.3
2 - 13
3
8-10
1.4 - 1.8
14 - 18
2
11-14
2.0- 2.5
20 - 25
1
15-70 2.7 - 12.6 27 - 126
0
The water hardness selector is set at the
factory to setting “1”.
Example:
For a water hardness level of 6 °d.
Turn the water hardness level selec-
tor to setting 3 (1 - 7 °d).
Replace the cover on the water hard-
ness level selector.
Before using for the first time
15
