Miele G 6100 Operating Instructions Manual Download Page 59

Page: 59 / 80

Frequently Asked Questions

Water intake fault

Problem

Possible cause and solution

The

Intake/Drain

indica‐

tor flashes on and off.

The water supply is turned off.

Turn on the water supply all the way.

The dishwasher stops
during a program.
The

Intake/Drain

indica‐

tor flashes.
Fault code

ɖɇɈ

ɖɇɉ

ap‐

pears in the display.

Before fixing the fault:

Turn the dishwasher off with the

button.

There is a problem with the water intake.

Turn on the water supply fully and start the pro‐
gram again.

Clean the water intake filter (see "Frequently asked
questions").

The water pressure at the intake is lower than 4.35
psi.
Contact a plumber.

Water drainage fault

Problem

Possible cause and solution

The dishwasher stops
during a program.
The

Intake/Drain

indica‐

tor flashes.
Fault code

ɖɇɇ

shows in

the display.

Before fixing the fault:

Turn the dishwasher off with the

button.

There is a problem with the water intake.
There might be water in the wash cabinet.

Clean the filter system (see "Cleaning and care -
Filter system").

Clean the drain pump (see "Frequently asked
questions").

Clean the non-return valve (see "Frequently asked
questions").

Remove any kink or loop in the drain hose.

Summary of Contents for G 6100

















































































Search results

Summary of Contents for G 6100

Reviews:

Related manuals for G 6100

Brands by name

Popular brands

Miele G 6100, Operating Instructions Manual

Search results

Summary of Contents for G 6100

Reviews:

Related manuals for G 6100

Brands by name

Popular brands