Miele G 6100 Operating Instructions Manual Download Page 58

Page: 58 / 80

Frequently Asked Questions

Problem

Possible cause and solution

The

Intake/Drain

and

Rinse Aid

indicator

lights are flashing at the
same time.
Fault number

ɖɨɨ

ap‐

pears in the display.

There may be a technical fault.

Turn the dishwasher off with the

button.

Turn the dishwasher back on after a few seconds.

Select the desired program.

Press the

Start

button.

If the indicator lights flash again, there is a technical
fault.

Contact Miele Service.

Fault

ɖɍɆ

The drain pump is still
running, even with the
door open.

The WaterProof System has reacted.

Turn off the water supply.

Contact Miele Service.

Fault

ɖɍɎ

A fault has occurred in the circulation pump.

Turn the dishwasher off for at least 30 seconds
with the

button.

Turn the dishwasher back on.

If the fault message appears again, there is a techni‐
cal fault.

Contact Miele Service.

Summary of Contents for G 6100

















































































Search results

Summary of Contents for G 6100

Reviews:

Related manuals for G 6100

Brands by name

Popular brands

Miele G 6100, Operating Instructions Manual

Search results

Summary of Contents for G 6100

Reviews:

Related manuals for G 6100

Brands by name

Popular brands