Before using for the first time
23
Salt refill indicator
ĺ
Fill the salt reservoir with dishwasher
salt when the
Salt
indicator light
comes on (If it comes on during a
program, wait until the end of the
program).
ɘ
Risk of corrosion!
Immediately after filling the salt res‐
ervoir, run the
Express
program with
the
Short
program option selected
and without any dishware in the
dishwasher to remove any traces of
salt from the cabinet.
After the salt reservoir has been filled,
the refill indicator may still be lit up if
the salt concentration has not yet
reached the correct level. It will go out
when the correct concentration is
reached.
The salt refill indicator will be switched
off if you have programmed the dish‐
washer for a water hardness below 5
gr/gal (5 °d).
If you only ever use combination prod‐
ucts in your dishwasher, you can
switch both refill indicators for salt
and rinse aid off if you wish (see "Op‐
tions - Refill indicators").
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add
dishwasher salt and rinse aid and to
switch the indicators back on.
