Miele G 6100 Operating Instructions Manual Download Page 46

Page: 46 / 80

Options

Turning off the refill indicators

If you consistently use a Tab detergent,
you can deactivate the refill indicators if
you wish.

Turn the dishwasher off with the

button, if it is turned on.

Press the

Start

button and,

simulta‐

neously

, switch the dishwasher on

using the

button.

Keep the

Start

button pressed for at

least four seconds until the

Start

indi‐

cator light comes on.

If this does not happen, start the proce‐
dure from the beginning again.

Press the

button 9 times.

The

indicator light will flash 9 times

at short intervals.

The flashing sequence in the time dis‐
play will show whether the refill indica‐
tors are switched on or off.

–

ɠɇ

: Refill indicators activated

–

ɠɆ

: Refill indicators deactivated

Press the

Start

button to change the

setting.

The setting is now stored in memory.

Turn the dishwasher off with the

button.

If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add
dishwasher salt and rinse aid and to
switch the indicators back on.

Summary of Contents for G 6100

















































































Search results

Summary of Contents for G 6100

Reviews:

Related manuals for G 6100

Brands by name

Popular brands

Miele G 6100, Operating Instructions Manual

Search results

Summary of Contents for G 6100

Reviews:

Related manuals for G 6100

Brands by name

Popular brands