Miele G 5266 Page 56 Operating Instructions Manual Download

Page: 56 / 92

Program options

Extra clean

You can choose this program option to
increase the cleaning performance of
the programs.

If you activate this program option, the
program cycle times and the main wash
temperatures will increase. The water
and energy consumption may increase.



Open the door.



Turn the dishwasher off with the



button, if it is turned on.



Press the



button in and,

while

holding it in

, turn the dishwasher on

using the



button.

Keep the



button pressed in for at

least 4 seconds until the



indicator

light comes on.

If this does not happen, start the
procedure from the beginning again.



Press the

Program

button 10 times.

The top left program indicator light will
emit 1 long flash at intervals.

The flashing sequence in the time
display indicates whether the
Extra clean program option is activated
or not:

 

: Extra clean is activated

 

: Extra clean is deactivated



Press the



button to change the

setting.

The setting is now saved.



Turn the dishwasher off with the



button.

Summary of Contents for G 5266





























































































Search results

Summary of Contents for G 5266

Reviews:

Related manuals for G 5266

Brands by name

Popular brands

Miele G 5266, Operating Instructions Manual

Search results

Summary of Contents for G 5266

Reviews:

Related manuals for G 5266

Brands by name

Popular brands