Problem solving guide
65
Water inlet fault
Problem
Cause and remedy
The
Inlet/Drain
check
indicator flashes on and
off.
The stopcock is closed.
Open the stopcock fully.
The dishwasher stops
during a programme.
The
Inlet/Drain
check
indicator flashes.
Fault code
or
ap‐
pears in the display.
Before rectifying the problem:
Switch the dishwasher off with the
button.
The water intake is restricted.
Open the stopcock fully and start the programme
again.
Clean the water inlet filter (see "Maintenance").
The water pressure at the intake is lower than 30
kPa (0.3 bar).
Seek professional advice.
Summary of Contents for G 4700
Page 2: ...2 ...
Page 37: ...Loading the dishwasher 37 Cutlery tray Heavily soiled items ...
Page 81: ......
Page 82: ......