Before using for the first time
28
Setting the rinse aid dosage
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from
approx. 0-6 ml. It is set to a recommen‐
ded setting of approx. 3 ml at the facto‐
ry.
If the function to adjust the Sensor
wash programme has been activated,
the amount of rinse aid dispensed in
the
Sensor wash
programme can be
higher than that set.
If spots appear on crockery and glass‐
ware:
Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
Decrease the rinse aid dosage.
Switch the dishwasher off with the
button, if it is switched on.
Press the
Start
button in and
whilst
holding it in
switch the dishwasher
on using the
On button
Keep the
Start
button pressed in for
at least four seconds until the
Start
indicator light comes on.
If this does not happen, start the proce‐
dure from the beginning again.
Press the
button 3 times.
The
indicator will flash rapidly 3
times at intervals.
The dosage set will show in the display
after the
symbol.
The factory default setting of
will
appear in the display.
This indicates a setting of 3 ml.
If you wish to change this setting use
the
Start
button.
Each press of the button moves you
up a level. When the highest rinse aid
level is reached, the setting starts
from the beginning again.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Summary of Contents for G 4700
Page 2: ...2 ...
Page 37: ...Loading the dishwasher 37 Cutlery tray Heavily soiled items ...
Page 81: ......
Page 82: ......