Miele G 4202 Operating Instructions Manual Download Page 53

Page: 53 / 96

Programme options

Memory

You can use the "Memory" option to
save the last programme selected.
Instead of the

ECO

programme, the last

programme selected will be selected
when the dishwasher is switched off
and back on again or the door is
opened and then closed at the end of a
programme.



Switch the dishwasher off with the



button, if it is switched on.



Press the





button in and

whilst

holding it in

switch the dishwasher

on using the



button.

Keep the





button pressed in for

at least four seconds until the





indicator light comes on.

If this does not happen, start the pro-
cedure from the beginning again.



Press the



button 6 times.

The



indicator will flash rapidly 6

times at intervals.

The flashing sequence in the display in-
dicates whether the "Memory" function
is activated or not.

–

 

: "Memory" activated

–

 

: "Memory" deactivated



Press the





button to change the

setting.

The setting is now stored in memory.



Switch the dishwasher off with the



button.

Summary of Contents for G 4202

































































































Search results

Summary of Contents for G 4202

Reviews:

Related manuals for G 4202

Brands by name

Popular brands

Miele G 4202, Operating Instructions Manual

Search results

Summary of Contents for G 4202

Reviews:

Related manuals for G 4202

Brands by name

Popular brands