Problem solving guide
72
Problem
Cause and remedy
White residue is visible
on crockery and cutlery,
clouding occurs on
glassware; film can be
wiped off.
The rinse aid dosage is set too low.
Increase the dosage. See "Before using for the
first time - Rinse aid".
There is no salt in the salt reservoir.
Fill the salt reservoir (see "Before using for the first
time, Dishwasher salt").
The salt reservoir cap has not been screwed on cor-
rectly.
Replace it, making sure that it screws back on cor-
rectly.
An unsuitable combination product has been used.
Change your detergent. Use a standard liquid, tab-
let or powder detergent.
The water softener is programmed to too low a water
hardness level.
Programme the water softener for harder water
(see "Before using for the first time, Water
softener").
There are rust stains on
cutlery.
The affected items are not corrosion resistant.
There is no remedy.
Purchase cutlery which is dishwasher-proof.
A programme was not run after dishwasher salt was
added. Traces of salt have got into the wash cycle.
Always run the
Gentle
programme with the
Turbo
option selected and without any crockery in
the dishwasher after adding dishwasher salt.
The salt reservoir cap has not been screwed on cor-
rectly.
Replace it, making sure that it screws back on cor-
rectly.
Summary of Contents for G 4202
