Miele G 4202 Operating Instructions Manual Download Page 48

Page: 48 / 96

Programme options

Turbo

The

Turbo

option reduces the duration

of programmes in which this option is
available.

In order to achieve optimum cleaning
results consumption rates are increased
with this option.



Switch the dishwasher on with the



button.

The





indicator light will flash.



Select a programme.



Press the

Turbo

button.

The

Turbo

indicator light comes on.



You can now start a programme.

The option selected will remain active
for all programmes until the setting is
changed.

DetergentAgent

For optimum cleaning results, the dish-
washer automatically adjusts the pro-
gramme sequence to the type of deter-
gent being used. Depending on the pro-
gramme, this can mean that the running
time and energy consumption vary
slightly.

Summary of Contents for G 4202

































































































Search results

Summary of Contents for G 4202

Reviews:

Related manuals for G 4202

Brands by name

Popular brands

Miele G 4202, Operating Instructions Manual

Search results

Summary of Contents for G 4202

Reviews:

Related manuals for G 4202

Brands by name

Popular brands