![background image](http://html.mh-extra.com/html/miele/g-1572/g-1572_operating-instructions-manual_234628035.webp)
Time display
The duration of the programme
selected appears in hours and minutes
in the Time display before the
programme begins. During the
programme the time left until the end of
the programme is displayed.
The time displayed may vary with the
same programme. This is partly
because of the water temperature at
each intake, and partly because of the
amount of crockery and how dirty it is.
When a programme is selected for the
first time, the display shows an average
time for a cold water intake.
The times shown in the Programme
Chart refer to standard test loads and
temperatures.
Each time a programme is run, the
electronic unit takes the new conditions
into account, and calculates the time
required.
Glass care indicator
The green Glass care indicator light will
come on when you select a programme
that is suitable for glassware.
At the end of a programme
At the end of a programme, the
In-operation indicator light will be
visible flashing slowly with the door
shut.
0
appears in the Time display.
You can then empty the dishwasher.
The In-operation indicator light will go
out one hour after the end of the
programme.
,
To prevent the risk of steam
damage to the worktop edging
above the dishwasher, it is advisable
to leave the door closed until you are
ready to unload the crockery.
Alternatively you can open the door
fully until the crockery is cool
enough to unload. Do not leave the
door only partially open.
Operation
35