Miele G 1572 Operating Instructions Manual Download Page 56

Page: 56 / 68

Problem

Possible cause

Remedy

Dishes, cutlery and
glasses are not dry
or are flecked.

The amount of rinse aid may
be insufficient, or the rinse
aid reservoir empty.

Replenish the reservoir,
increase the dosage or
change the brand of rinse
aid. See Before using for the
first time.

Crockery was taken out of
the cabinet too soon.

Leave it in for longer. See
Operation.

Combination tabs have been
used which have impaired
drying performance.

Set the Combi tab function to
Normal, and fill the rinse aid
reservoir with rinse aid. See
"Additional functions".

The Combi tab function has
been selected, but the
wrong type of detergent was
used.

Set the Combi tab function to
the detergent product being
used (see "Additional
functions").

White residue is
visible on cutlery
and crockery,
clouding occurs on
glassware; film can
be wiped off.

Not enough rinse aid was
used.

Increase the dosage. See
Before using for the first time
- Rinse aid.

There is no salt in the salt
reservoir.

Fill the salt reservoir. See
Before using for the first time
- Filling the salt reservoir.

An unsuitable combination
detergent has been used.

Change your detergent. Use
a standard liquid, tablet or
powder detergent.

There is a fault with the auto-
matic water softening
system.

Call the Service Department.

Problem solving guide

Summary of Contents for G 1572





































































Search results

Summary of Contents for G 1572

Reviews:

Related manuals for G 1572

Brands by name

Popular brands

Miele G 1572, Operating Instructions Manual

Search results

Summary of Contents for G 1572

Reviews:

Related manuals for G 1572

Brands by name

Popular brands