Drip tray
The drip tray catches excess water.
When the drip tray is full the
0
symbol
in the ice/water dispenser control panel
will flash and dispensing will stop.
There are sensors in the drip tray which
measure when the drip tray needs to be
emptied.
To avoid a build-up of odour, the drip
tray should be cleaned every day.
When the
0
symbol flashes,
^
remove the drip tray cover and the
grille.
^
Mop out the drip tray using a sponge
or tea towel and then clean it.
^
Clean the drip tray cover and the
grille.
^
Replace the grille and the drip tray
cover.
The
0
symbol will now be highlighted in
white again.
Ventilation gaps
^
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build-up
of dust will increase the energy
consumption of the appliance.
Door seals
Do not use any grease or oil on the
door seal as these will cause the
seal to deteriorate and become
porous over time.
^
The door seal should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
After cleaning
^
Replace all shelves and accessories
in the appliance.
^
Reconnect to the mains and switch
the appliance back on.
^
Switch on the Super freeze function
so that the freezer can cool down
quickly.
^
Once the freezer has reached the
required temperature, place the food
back in the freezer baskets.
^
Switch off the Super freeze function
as soon as the temperature in the
freezer is a constant -18°C or colder.
Cleaning and care
44
Summary of Contents for F 1472 Vi
Page 67: ...Niche width A F 1472 Vi 457 mm 460 mm Building in dimensions 67 ...
Page 88: ...88 ...
Page 89: ...89 ...
Page 90: ...90 ...
