After building in, it may be necessary to align the front of the
food warming drawer.
^
Remove screws
a
from the left and right side of the drawer
front.
^
Carefully lift the control panel out, taking care not to
damage or pull on the cable, and place it on the floor of the
drawer.
^
Loosen the 2 screws
b
on the inside of the drawer front.
^
Align the drawer front.
^
Tighten the screws on the inside of the drawer front.
^
Carefully replace the control panel, taking care not to
damage or pull on the cable.
^
Replace the 2 screws in the left and right side of the drawer
front.
Aligning the front of the food warming drawer
35
Summary of Contents for ESW 47.2
