Miele ESW 47.2, Operating And Installation Manual

Page: 36 / 44

The furniture front must be at least 10 mm thick, and be able
to withstand temperatures of at least 60 °C. The furniture front
including handle must not exceed 5.0 kg in weight.
^
Attach the handle to the furniture front using counter sunk
screws.
^
Remove the screws from the left and right side of the
drawer front. Carefully lift the control panel out, taking care
not to damage or pull on the cable, and place it on the floor
of the drawer (see "Aligning the front of the food warming
drawer").
^
Loosen the two screws inside the drawer, and remove the
fixing panel from the front of the drawer.
^
Pre-drill the furniture front (see illustration).
C
10 mm, D = 10 mm
^
Secure the fixing panel to the furniture front (see illustration)
Fixing the furniture front
36