Rinse aid
For best results the rinse aid dosage
can be adjusted.
The dosage can be set between 0-6 ml.
The factory default dosage setting is
3 ml rinse aid.
If spots appear on the dishes:
– Use a higher setting for rinse aid.
If smearing or streaking show:
– Use a lower setting for rinse aid.
^
Select the desired rinse aid amount
and confirm with the center button.
Buzzer
When the buzzer is activated, a tone
sounds at the end of a program and if a
fault occurs.
Buzzer at the end of a program
The buzzer at the end of a program
sounds four times in intervals with a
brief break in between. The buzzer
sounds if the dishwasher has not been
turned off.
The buzzer at the end of a program is
turned off by default.
Buzzer in case of a fault
In the event of a fault, the buzzer
sounds continuously.
The fault buzzer cannot be turned
off.
Buzzer volume
There are seven different volume
settings. If no volume level is selected,
the buzzer is deactivated.
^
Select the desired volume and
confirm with the center button.
Settings menu
43
