Problem solving guide
175
Problem
Cause and remedy
F10
The suction tube in the water container
– is not fitted correctly.
– is not positioned vertically.
Connect it properly and make sure it is vertical:
F11
F20
The drain hoses are blocked.
Descale the steam oven (see “Care” in the “Clean-
ing and care” chapter).
If the fault message appears again, contact Miele
Service.
F44
Communication fault
Switch the steam oven off and then back on again
after a few minutes.
If the same message appears again, call the Ser-
vice Department.
F55
The maximum operating time for a cooking function
has been exceeded. This has triggered the safety
switch off device.
Switch the steam oven off and then back on again.
The steam oven is immediately ready for use again.
F196
There is a fault.
Switch the steam oven off and then back on again.
The filter in the bottom of the oven compartment is
not positioned correctly.
Switch the steam oven off.
Insert the filter correctly:
Switch the steam oven back on again.
If the fault message appears again, call Miele Ser-
vice.
Summary of Contents for DGC 7860 X
Page 184: ...Installation I N S T A L L A T I O N 184 Side view A Glass front 22 mm Metal front 23 3 mm ...
Page 192: ......
Page 193: ......
Page 194: ......