Problem solving guide
174
Problem
Cause and remedy
The control panel will
not open or close auto-
matically despite touch-
ing the
sensor sev-
eral times.
Something is obstructing the control panel.
Remove the obstruction.
The obstruction sensor is very sensitive and can pre-
vent the panel opening or shutting if it picks up a sig-
nal.
Open/close the control panel manually (see end of
this section)
If the problem occurs again, contact Miele Service.
The
Start at
and
Finish at
functions are not avail-
able.
The temperature in the oven compartment is too high,
e.g. after a programme has finished.
Open the door and let the oven compartment cool
down.
These functions are not generally available in main-
tenance programmes.
Cakes and biscuits are
not cooked properly
after following the dura-
tions given in the re-
cipe.
The temperature set is not the same as the one given
in the recipe.
Change the temperature.
The recipe has been altered. For example, adding
more liquid or eggs can increase the cooking duration
required.
Adapt the temperature and/or cooking duration to
the altered recipe.
The grease filter on of the back panel (optional ac-
cessory) is inserted. This increases the cooking dura-
tion.
Adjust the cooking duration.
Cakes or biscuits are
unevenly browned.
The set temperature was too high.
More than two levels were used for baking.
Bake on a maximum of two levels.
The grease filter has not been taken out of the back
panel (optional accessory).
Summary of Contents for DGC 7860 X
Page 184: ...Installation I N S T A L L A T I O N 184 Side view A Glass front 22 mm Metal front 23 3 mm ...
Page 192: ......
Page 193: ......
Page 194: ......