Miele DGC 7440, Operating And Installation Instructions

Page: 155 / 172

Problem solving guide
155
Problem Possible cause and remedy
The oven lighting
doesn't come on. The lamp needs to be replaced.
 Call Miele to have the lamp replaced.
The control panel will
not open or close
automatically despite
touching the
 sensor
several times.
Something is obstructing the control panel.

Remove the obstruction.
The obstruction sensor is very sensitive, which means
the control panel sometimes doesn't open or close.
 Open/Close the control panel manually (see end of
this section).
 If the problem occurs again, contact Miele.
The
Start at
and
Finish at
functions are not
available.
The temperature in the oven compartment is too high,
e.g. after a programme has finished.

Open the door and let the oven cool down.
These functions are not generally available in
maintenance programmes.
Cakes and biscuits are
not cooked properly
after following the
durations given in the
recipe. The temperature set is not the same as the one given
in the recipe.

Change the temperature.
The recipe has been altered. For example, adding
more liquid or eggs can increase the cooking duration
required.
 Adapt the temperature and/or cooking duration to
the altered recipe.
The grease filter on the back panel (optional
accessory) is fitted. This increases the cooking
duration.

Adjust the cooking duration.
Cakes or biscuits are
unevenly browned. The temperature was set too high.
More than two shelf levels were used for baking.
 Bake on a maximum of two levels.
The grease filter has not been taken out of the back
panel (optional accessory).