Miele DA 5106 Operating And Installation Instructions Download Page 29

Page: 29 / 60

Cleaning and care



Replace the grease filter, making sure

that the locking clip is facing

outwards.



If the grease filter is inadvertently

replaced the wrong way round, insert

a small screwdriver blade into the slit

to disengage the clip.

Resetting the grease filter operating

hours counter

After cleaning, the operating hours

counter needs to be re-set.



Whilst the fan is switched on, press

the operating hours control



for

approx. 3 seconds, until only the

flashing.

The grease filter symbol



goes out.

If you want to clean the grease filter(s)

before the operating hours counter has

reached its maximum,



Press the operating hours control



for approx. 6 seconds, until only

the

is flashing.

Charcoal filter

If the cooker hood is connected for

recirculation, a charcoal filter must be

inserted in addition to the grease filter.

This is designed to absorb cooking

odours.

It is fitted in the canopy above the

grease filter.
Replacement charcoal filters can be

obtained from your Miele retailer or via

the internet at www.miele-shop.com.

See back of manual for contact details,

and "Technical data" for type and

reference number.

Fitting/replacing a charcoal filter



Before fitting or replacing the

charcoal filter, the grease filter must

first be taken out (see previous

section for instructions on how to do

this).



Take the charcoal filter out of its

packaging.



Press the charcoal filter into the

frame.



Replace the grease filter.



When fitting for the first time, activate

the operating hours counter (see

"Operation").

Summary of Contents for DA 5106





























































Search results

Summary of Contents for DA 5106

Reviews:

Related manuals for DA 5106

Brands by name

Popular brands

Miele DA 5106, Operating And Installation Instructions

Search results

Summary of Contents for DA 5106

Reviews:

Related manuals for DA 5106

Brands by name

Popular brands