Miele DA 5106 Operating And Installation Instructions Download Page 22

Page: 22 / 60

Operation (Manual mode)

Switching the hob lighting on /

off

The hob lighting can be switched on

and off independently of the fan.



To do this, press



The



symbol will light up when the

hob lighting is switched on.

Power management

The cooker hood features a power

management system to help save

energy. The fan power level is reduced

and the lighting is switched off

automatically.

– If the Intensive setting is selected,

the fan automatically switches to

level 3 after 5 minutes.

– From levels 3, 2 or 1 the power will

be reduced by one level after 2 hours

and then in 30 minutes stages until

the fan finally switches off.

– The hob lighting will switch off

automatically after 12 hours.

Switching Power management on/off

You can deactivate Power

management.

This can result in increased electricity

consumption.



Switch off the fan and the lighting.



Press the run-on option button



for approx. 10 seconds, until

lights up in the power level display.



Then press in turn,

– the lighting button



– the "



" button and then

– the lighting button



again.

If Power management is switched on,

the

and

indicators will light up

constantly.

If it is switched off,

and

will flash.



Press "



" to switch Power

management off.

The

and

indicators will flash.



To switch it on, press "



The

and

indicators will light up

constantly.



Confirm the setting with the run-on

option button



All the indicator lamps will go out
If you do not confirm within 4 minutes,

the cooker hood will revert to the old

setting.

Summary of Contents for DA 5106





























































Search results

Summary of Contents for DA 5106

Reviews:

Related manuals for DA 5106

Brands by name

Popular brands

Miele DA 5106, Operating And Installation Instructions

Search results

Summary of Contents for DA 5106

Reviews:

Related manuals for DA 5106

Brands by name

Popular brands