Changing a halogen lamp
^
Before any cleaning or maintenance
work, disconnect the cooker hood
from the mains supply. Ensure that:
– it is switched off at the isolator, or
– it is switched off at the wall socket
and the plug is withdrawn, or
– the fuse from the fused spur
connection unit is withdrawn, or
– the mains fuse is disconnected, or
– the screw-out fuse is removed (in
countries where this is applicable).
,
Exercise caution when changing
halogen lamps. They get very hot
during use and remain hot for some
time after being switched off. Let
them cool down before you change
them.
^
To access the halogen lamp, push
the lamp cover gently upwards. The
cover will open and can be pulled
down.
^
Pull the old halogen lamp out of the
connection socket.
^
Using a cloth or glove, push the new
lamp (12 V, 20 W, G4 cap) carefully
into the connection socket. Please
follow the manufacturer's instructions.
^
Push the cover back up and make
sure it clicks into place.
Cleaning and care
25
Summary of Contents for DA 428-4
Page 12: ...Guide to the appliance 12 ...
Page 28: ...Assembly parts Installation 28 ...
Page 39: ...39 ...
Page 40: ...Alteration rights reserved 0410 M Nr 07 769 430 00 ...