Miele DA 428-4, Operating And Installation Instructions

Page: 22 / 40

Important for appliances with special
finish
(Titanium and special order finishes)
Please follow the information given in
“General notes" earlier in this section.
However, please be aware that it is very
difficult to clean this type of surface
without causing minor marks to the
surface material.
This can become particularly
noticeable with darker colours and if
there is halogen lighting in the kitchen.
Controls
The controls may suffer
discolouration or damage if soiling is
left on them for too long. Remove
soiling straight away.
Please observe the "General notes" on
cleaning.
Do not use stainless steel cleaning
agents on the controls.
Grease filters
The re-usable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapours, preventing soiling of the
cooker hood.
The grease filters should be cleaned
regularly (at least every 3-4 weeks) to
avoid a build-up of grease but always
clean immediately the grease filter
touch control lamp comes on.
An oversaturated filter is a fire
hazard.
^
To take out the grease filters, release
the locking clip on the filter, lower the
filter 45°, unhook it at the back and
remove it.
To avoid damaging the filter or the
hob below, make sure you hold the
filter securely at all times when
handling it.
Cleaning and care
22