Description of the appliance
The cooker hood is suitable for
. . .
. . . Air extraction:
Air is drawn in through the grease
filter
f
cleaned and directed outside.
. . . Air recirculation:
Air is drawn in through the grease
filter
f
and then through the active
charcoal filters for cleaning. It is
passed back into the kitchen through
the top of the kitchen cabinet.
Before using for the first time check
to see whether the active charcoal
filter is in place (see ”Cleaning and
Care“).
b
- Slide switch for hob
illumination
n
This is used to switch the hob illumina-
tion
g
on and off, regardless of
whether the cooker hood is in operation
or not. The deflector plate must be
pulled out a few centimetres for the
lighting to work.
0 - Lighting off
l
- Lighting on
c
- Slide switch for the fan
m
This is used to switch the fan on and off.
0 - Fan off
l
- Fan on
d
- Slide switch for ”Power selec-
tion“
The power of the cooker hood can be
suited to the intensity of the kitchen va-
pours, and has four settings.
The fourth setting (Intensive setting)
should be selected for removing very
strong kitchen vapours.
low power.......strong power
e
- Deflector plate
The deflector plate can be pulled out to
any extent up to its limit.
The action of pulling the deflector plate
out and pushing it in switches the
cooker hood on and off respectively.
The slide switch for the fan must be set
to setting ”
l
“.
h
- Grease filter retainer
This is used for securing or releasing
the grease filter
f
for removal from the
cooker hood.
i
The control panel can either
- be fitted with an
aluminium front
facia panel
, available from Miele,
- be fitted with a
lightshield from the
kitchen furniture programme
, or
- be installed without either of the
above, but with
cover caps
(supplied
for fitting at each end).
Description of the appliance
5
