Press the cover caps (1) on to the
screws (2).
Building in
Take the dividing wall out of the wall
unit.
* depending on the lightshield profile
Dimension * = 171
+ 1 mm plus width
and return of the lightshield.
Screw the 3.5 x 13 mm holding
screws in on both sides at the posi-
tions marked ”X“.
Leave 3 mm of the holding screws pro-
truding for hanging the cooker hood
on.
Hang the wall unit and align.
Push the brackets into the slots on
the sides of the cooker hood.
Fix the brackets into place on the
cooker hood using the M 6 x 10 mm
hexagonal screws and washers.
Insert the cooker hood into the unit
from below and hang it onto the hold-
ing screws.
Secure the cooker hood using two
3 x 16 mm screws on each side.
1
2
Installation
21
