Operation
21
Switching the downdraft
extractor on
Insert the extraction grille.
Touch the
sensor.
The sensor controls will light up.
If no further entry is made, the
downdraft extractor will switch itself
off after a few seconds.
Setting/Changing the power
level
For light to heavy cooking vapours and
odours, select from power levels
1
to
3
.
For short periods of cooking food with
intensive vapours and a strong aroma,
e.g. when searing meat, select Booster
setting
B
.
Touch the required power level.
Booster
The maximum duration for the Booster
is 10 minutes.
To switch the Booster off early, set a
different power level.
Switching the downdraft
extractor off
Touch the
sensor.
The sensor controls go out.
If the downdraft extractor is not
switched off, it will switch itself off
12 hours after the last automatic
operation.
Run-on time
In order to rid kitchen air of steam and
odours, the downdraft extractor
continues to run for 5 minutes on the
power level that was set last. The
power level is gradually reduced during
the run-on time. The current power level
pulsates during the run-on time.
Useful tip:
To help release vapours
effectively with pans over 15 cm high,
place a wooden spoon between the lid
and the pan.
Summary of Contents for CSDA 7001 FL
