manualshive.com logo in svg

Miele CS 1011-1, Operating And Installation Instructions, Page: 34 / 68

Share
Download
Miele CS 1011-1 Operating And Installation Instructions Download Page 34

Cleaning and care

34

Assembling the burners

Place burner head 

 on to burner

base 

 so that the thermocouple 

and the ignitor 

 extend through

their respective holes in the burner
head. 
The lobes 

 on the burner cap must

fit into the recess 

 on the burner

head. The lobes 

 on the burner

head must fit into the recess 

 on

the burner base.

Replace the burner ring 

.

Then place the burner caps 

 and 

in position.

The burners cannot function cor-

rectly if they are incorrectly as-
sembled. This can lead to damage to
the appliance and injury.
Ensure that all parts of the burner are
reassembled in the correct order.

Ignite all burners to check that they
are burning correctly:

- The flame must not go out on the

lowest setting, or when the control is
turned quickly from the highest to the
lowest setting.

- On the highest setting, the flame

must have a distinctive and visible
core.

Summary of Contents for CS 1011-1





































































Reviews:

No comments