Before using for the first time
24
Enter the local water hardness level
(in °dH) and confirm with
OK
.
Selecting Performance mode
Select the most suitable mode
depending on your coffee preferences
(see “Settings - Performance mode”).
-
Eco mode
: This is an energy saving
mode.
-
Barista mode
: This mode is
optimised for perfect coffee
enjoyment.
-
Latte mode
: In this mode drinks with
milk can be made significantly faster.
Select the required mode and confirm
this with
OK
.
Your machine has been successfully set
up and is ready for use.
Confirm with
OK
.
The coffee machine heats up and rinses
the pipework. The water used for
rinsing will run out of the central spout.
Before making drinks with milk for the
first time, rinse the milk pipework (see
“Cleaning and care – Rinsing the milk
pipework”).
Please note that the full aroma of the
coffee and typical crema will not
develop fully until several coffees have
been made.
To ensure that any coffee residues
from the factory testing process are
removed from the brewing system,
please pour away the first two cups
of coffee when using the coffee
machine for the first time.
Switch the coffee machine off with
the On/Off
sensor. Do not switch
off at the power socket to switch off
the coffee machine. If you
disconnect the coffee machine from
the electrical supply while using it for
the first time, you will have to set it
up for use again.
For the first coffee drinks, a larger
quantity of coffee beans is ground and
powder from the coffee grounds may
adhere to the lid of the drip tray.
Summary of Contents for CM 6160
Page 88: ...Appliance dimensions INSTALLATION 88 ...
Page 90: ......
Page 92: ...M Nr 11 619 020 00 en AU NZ CM 6160 CM 6360 CM 6560 ...