manualshive.com logo in svg

Miele CM 6160, Operating Instructions Manual

Share
Download
Miele CM 6160 Operating Instructions Manual Download Page 46

Settings

46

Displaying and changing
Settings

The drinks menu is displayed.

Touch the 

 sensor.

Select 

Settings 

 and touch 

OK

.

Select the option you want to display
or change.

Confirm with 

OK

.

Change the setting as required and
confirm with 

OK

.

Some settings which can be found in
the 

Settings

 menu are described in

their separate sections in the
operating instructions.

Language

You can select a language and country
variant for all display texts.

Useful tip: 

 If you select the wrong

language by mistake, you can find the
“Language” option again via the

 symbol.

Timer: Switch off after

If none of the sensors has been
touched or no drink has been made, the
coffee machine will switch itself off after
20 minutes to save energy.

You can change this preset (can be set
between 20 minutes and 9 hours).

TeaTimer

You can use the TeaTimer to start a
minute minder when making tea (see
“Making drinks - TeaTimer”).

Volume

You can set the volume of buzzer and
keypad tones using the segment bar.

Display brightness

You can set the display brightness
using the segment bar.

Lighting

You can adjust the brightness of the
lighting when the machine is switched
on or off.

You can also set for the switched off
appliance the length of time after which
the lighting should switch off (between
15 minutes and 9 hours).

Info (display information)

You can display the number of drink
portions or the number of possible
portions before maintenance
programmes are necessary.

Altitude

If the coffee machine is installed at high
altitudes, the lower air pressure will
cause the water to boil at a lower
temperature. You can set the local
altitude of the machine to ensure that
the correct temperatures are achieved.

Performance mode

You can select the most suitable
performance mode for your type of use.

Eco mode

 is set as standard.

Eco mode

Eco mode is an energy saving mode.
The system heats up only once drink
preparation has started.

Summary of Contents for CM 6160





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands