Important note for Miele vacuum
cleaner model S 5980 / S 5981
^
Connect the CarClean Set Plus
suction hose as described above.
^
Switch the vacuum cleaner on using
the On/Off foot control
s
.
^
Press the Reset button.
The vacuum cleaner will switch on. It
can only be used at maximum power.
Hose tidy
The hose clip
e
can be used for
hanging the hose up (illustration
n
). It
is supplied with screws and rawl plugs
for securing it to a wall.
Using the hand-held
Turbobrush
o
The hand-held Turbobrush is suitable
for vacuuming car seats and carpets. It
can also be used in the home for stairs
and other areas inaccessible with a
standard Turbobrush.
Maintenance and care
,
Always disconnect the vacuum
cleaner from the electrical supply for
cleaning or maintenance work on
the hand-held Turbobrush. Switch
off at the wall socket and remove the
plug.
Removing threads and hairs
(illustration
p
)
^
Cut any threads or hairs that have
become entangled on the brush roller
with a pair of scissors. Then run the
vacuum cleaner to vacuum up the
bits.
For more obstinate tangles or blockages
inside the hand-held Turbobrush, the
cover can be opened. Any large
particles inside it can then be easily
removed.
^
Turn the grip so that the release
button is in the middle of the guide
(illustration
q
- a).
^
Press the release button (illustration
q
- b), and pull the grip out from the
hand-held Turbobrush as far as
possible (illustration
q
- c).
^
Lift the upper part of the casing as far
as it will go (iIlustration
r
), and
remove any debris from the inside of
the casing and from the brush roller.
^
Close the casing, and push the grip
back into position until it clicks into
place over the release button.
en
13
