CarClean Set Plus
(see illustrations on pages 2, 4, and 5)
The accessories in the Miele CarClean
Set Plus should only be used with Miele
vacuum cleaner models S 227 - S 858
and the S 4000 and S 5000 series.
If your vacuum cleaner is fitted with
connection
A
(see below) you can use
the hose of the CarClean set, otherwise
an adapter must be used.
–
Adapter
B
:
for S 4000 and S 5000 series.
–
Adapter
C
:
for any other Miele vacuum cleaner.
^
Connect adapter,
B
or
C
, to the
CarClean Set hose, until it clicks. Pay
attention to the correct positioning
(see illustration).
CarClean Set Vario
(see illustrations on pages 2, 3 and 5)
The Miele CarClean Set Vario has been
designed as an accessory for
non-Miele canister vacuum cleaners.
The enclosed adapter,
f
, is required to
connect the accessories to non-Miele
canister vacuum cleaners.
Accessories
a
Micro hose with combination nozzle
(crevice nozzle and dusting brush)
b
Hand Turbobrush
c
Crevice nozzle (12 in. / 300 mm)
d
+
e
Suction hose (9.8 ft / 3 m) with
hose holder and connection (only in-
cluded with the CarClean Set Plus)
f
Accessory adapter (only included
with the CarClean Set Vario)
Connecting the suction hose
d
^
Fit the latch ring or the adapter into
the suction socket of your vacuum
cleaner (illustrations
g
to
i
).
^
To disconnect the hose from the va-
cuum cleaner, press the release but-
tons (illustrations
j
to
l
) and pull
the latch ring or adapter out of the
suction socket.
en (US/CA)
64
