Miele Blizzard CX1 SKCR3, Operating Instructions Manual

Page: 103 / 112

27
Fault resolution

Always disconnect the vacuum
cleaner from the power supply be-
fore attempting to rectify a fault.
Switch off at the wall socket and un-
plug it.
Cleaning the pre-filter
The pre-filter is located at the rear of the
vacuum cleaner.
This should be cleaned if it is obviously
dirty.

Remove the dust container.

Release the handle of the pre-filter
and remove the pre-filter.

Rinse the pre-filter under cold running
water.

Do not use washing-up liquid!
Do not use any sharp or pointed ob-
jects!
Dry the pre-filter carefully!

Replace the dry filter in the dust con-
tainer and lock the handle.

Replace the dust container in the va-
cuum cleaner.
Cleaning the fine dust filter manually
Allow a drying time of 24 hours.
 Remove the dust container.