Miele Blizzard CX1 SKCR3, Operating Instructions Manual

Page: 105 / 112

29

Rinse the outside of the fine dust filter
under cold running water.

Do not clean the inside of the
fine dust filter!
Do not use washing-up liquid!
Do not use any sharp or pointed ob-
jects and do not brush the fine dust
filter!
After cleaning, allow the fine dust fil-
ter to dry for a minimum of 24 hours!
 Clean the fine dust filter container
with water and mild washing-up li-
quid.
 Dry the fine dust filter container thor-
oughly.

Insert the dry fine dust filter into the
dry fine dust container so that the
marking is pointing to the

symbol.
 Lock the top into place so that the
marking is pointing to the
 symbol.

Replace the fine dust container in the
vacuum cleaner and lock it into place.

Replace the dust container in the va-
cuum cleaner.
After sales service
Contact in case of malfunction
In the event of any faults which you
cannot remedy yourself, please contact
your Miele Dealer or Miele Service.
Contact information for Miele Service
can be found at the end of this docu-
ment.
Please note that telephone calls may be
monitored and recorded for training
purposes and that a call-out charge will
be applied to service visits where the
problem could have been resolved as
described in this booklet.