Miele 51506263IRL Operating And Installation Instructions Download Page 65

Page: 65 / 96

Installation

*INSTALLATION*

Securing the transit bars



Secure the transit bars to the back of
the washing machine.

Tip:

Make sure that the holes



are fit-

ted over the retainers





Risk of damage from incorrect

transport.
The washing machine may become
damaged if moved without the transit
bars in place.
Keep the transit bars in a safe place.
Fit them again if the washing ma-
chine is to be moved (e.g. when
moving house).

Fitting the transit bars

Opening the covers



Press against the retainer with a
sharp object (a narrow screwdriver,
for example).

The cover opens.

Fitting the transit bars



To fit the bars, follow the instructions
for removing them in reverse order.

Tip:

The bars will slide in more easily if

you lift the drum slightly.

Summary of Contents for 51506263IRL

































































































Search results

Summary of Contents for 51506263IRL

Reviews:

Related manuals for 51506263IRL

Brands by name

Popular brands

Miele 51506263IRL, Operating And Installation Instructions

Search results

Summary of Contents for 51506263IRL

Reviews:

Related manuals for 51506263IRL

Brands by name

Popular brands