background image

Installation

*INSTALLATION*

62

Transporting the washing ma-
chine to its installation site

Danger of injury from incorrect

transport.
If the washing machine tips up there
is a danger of injury to people and
damage to property.
Make sure the washing machine is
stable during transportation.

Transporting the washing machine
with a sack truck

If transporting the washing machine
with a sack truck, make sure its left or
right side is resting on the truck.

Risk of damage from incorrect

transport.
The front or back of the washing ma-
chine may be damaged if the ma-
chine is transported with a sack
truck.
Always insert the sack truck under
one of the sides of the washing ma-
chine.

Transporting the washing machine to
its installation site

The protruding lid at the back can be
used to hold the machine when trans-
porting.

Danger of injury due to unsecure

lid.
The fixings at the back of the lid
could break as a result of external
forces. There is a danger of the lid
being pulled off when carrying the
machine.
Before carrying the machine, check
that the lid is secure where it pro-
trudes at the back of the machine.

Carry the washing machine by the
front feet and by the lid where it pro-
trudes at the back of the appliance.

Summary of Contents for 51506263IRL

































































































Reviews: