Miele 4002516488002 Operating Instructions Manual Download Page 38

Page: 38 / 76

Fragrance flacon

Opening the fragrance flacon

Before drying, you can select the in-
tensity of the fragrance.



Turn the outer ring clockwise: the fur-
ther you open the fragrance flacon,
the more intense the fragrance.

Damp laundry and longer drying dura-
tions with sufficient heat transfer are
needed for the fragrance to be released
into the laundry effectively. The fra-
grance will also be noticeable in the
room air during the process.

Closing the fragrance flacon

After drying, the fragrance flacon should
be closed to prevent the fragrance from
escaping needlessly.



Turn the outer ring counter-clockwise
until marker

is in position

If you wish to dry without the fra-
grance occasionally: remove the fra-
grance flacon and store it in its original
packaging.

Replace the fragrance flacon with a
new one when the intensity of the fra-
grance is no longer sufficient.

Summary of Contents for 4002516488002













































































Search results

Summary of Contents for 4002516488002

Reviews:

Related manuals for 4002516488002

Brands by name

Popular brands

Miele 4002516488002, Operating Instructions Manual

Search results

Summary of Contents for 4002516488002

Reviews:

Related manuals for 4002516488002

Brands by name

Popular brands