Installation
*INSTALLATION*
98
Remove the mounting aid.
Screw the knurled nut onto the bolt
by hand to fix the oven in the cabinet
niche.
Taking the oven out of the housing
unit
Open the door.
Unscrew the knurled nuts and bolts
from the front frame (see “Securing
the oven in the housing unit”).
Keep these parts in case the oven
needs to be installed again in the
future.
Risk of injury caused by
dropping the appliance.
The oven can tip forward and cause
serious injuries if the carry handles
are inserted into the holes at the
back.
Always insert the carry handles into
the holes at the
front
of the side
wall.
Pull the oven out of the housing unit
until the holes for the carry handles
are visible (1.).
Insert the carry handles into the holes
at the
front
at the top of the side
walls on each side of the oven (2.).
Do not carry the oven by the door
handle. This could damage the door.
Use the carry handles on the side of
the housing to lift the appliance.
Take the oven out of the housing unit.
Disconnect the oven from the power
supply.
