System settings
54
Setting the net-
work
The Ethernet connection is configured in the
Network
menu. The net-
work can be configured on the machine display or using the web in-
terface. Before the machine is connected for the first time, e.g. to a
network printer, the network must be configured on the machine dis-
play. To set the printer up in the web interface, see the programming
handbook.
You will receive the information required for configuring the network
from your network administrator.
Press the
Network
button.
The network configuration parameters are displayed. The buttons
next to the parameters open the on-screen keyboard.
Enter the required values for each parameter and press
OK
to con-
firm.
Use the IP address or the Host name to address the machine in the
network.
Manual entry
Parameters
Report version IPv4
Report version IPv6
Active
Active
Active
DHCP
Inactive
Inactive
IP address
Input field
Input field
Subnet mask
Input field
–
Prefix length
–
Input field
Host name
Input field
Input field
Standard gateway
Input field
Input field
NTP
Input field
Input field
Automatic assignment
Parameters
Report version IPv4
Report version IPv6
Active
–
–
DHCP
Active
Active
IP address
–
–
Subnet mask
–
–
Prefix length
–
–
Host name
Input field
Input field
Standard gateway
–
–
NTP
–
–
