MACHINE STATUS
REV.0.03_COD.610078_A4
Page 35
8.4
Reset procedure
In the event of a malfunction during a cycle in progress, the door remains closed and locked.
To acknowledge the error message, it is necessary to carry out a procedure on the keyboard
as follows:
Press the STOP
and START
buttons together and keep pressed for 5 seconds.
Press the program P2
button followed by the program P1
button.
The machine is reset and returns to ready for operation and it’s possible to open the
door.
Note:
If the machine shutdown persists due to a fault in one of its components (e.g., faulty probe,
etc.), the door is released and the machine remains inactive.
In case this situation happens, seek technical assistance.
