background image

TASC ROADSIDE SPRAYER SUPPLEMENT

999-1512

8

R1

V 3.10

MIDWEST TECHNOLOGIES, INC.

  TASC- 6300 SPRAY CONTROL

APPLICATION RATES:

CHEM.1  =   511.1 OZ/100 GAL

CHEM.2  =     64.0 OZ/100 GAL

CHEM.3  =     64.0 OZ/100 GAL

CARRIER =      . 0   GAL/MIN

VOLUME APPLIED:

CHEM.1  =    10.16 GAL

CHEM.2  =    10.11 GAL

CHEM.3  =    10.01 GAL

CARRIER  =   803 GAL

AREA COVERED:

FIELD  =  27.50 ACRES

TOTAL =      7.2 ACRES

CHEM. DESCRIPTION

CHEM.1  = ...............................

CHEM.2  = ...............................

CHEM.3  = ...............................

WEATHER DATA:

TEMP................ %-HUMD...........

WND....................DIR...................

FIELD# ....................................................

REF. # .......................................................
DATE:......./........./........  TIME: ..... : .......
OPER.  ......................................................

HANDGUN MODE, PRINTER OUTPUT SAMPLES

The following two sample printouts show the typical printouts in the HANDGUN MODE.
The one on the left shows metric units and the one on the right shows english units.

MIDWEST TECHNOLOGIES, INC.

  TASC- 6300 SPRAY CONTROL

APPLICATION RATES:

CHEM.1  =   39.92  L/100L

CHEM.2  =    4.99 L/1000L

CHEM.3  =    4.99 L/1000L

CARRIER =      . 0   L/MIN

VOLUME APPLIED:

CHEM.1  =    38.46 LITERS

CHEM.2  =    38.25 LITERS

CHEM.3  =    37.87 LITERS

CARRIER  =   3038 LITERS

AREA COVERED:

FIELD  =  10.04 HA

TOTAL =     1.8 HA

CHEM. DESCRIPTION

CHEM.1  = ...............................

CHEM.2  = ...............................

CHEM.3  = ...............................

WEATHER DATA:

TEMP............... %-HUMD...........

WND....................DIR. ................

FIELD# ....................................................

REF. # ......................................................
DATE:......./........./........  TIME: ..... : .......
OPER.  .....................................................

Summary of Contents for Mid-Tech TASC 6000










Reviews: