Midway CRUIS'N USA, Manual

Page: 17 / 80

Dip Switch Test
The DI P Switch Test allows the operator to check the location of the two 8-position DI P switches
on the CPU Board. The operator can also change the setting of each position of each DIP
Switch during this mode.
To enter the test, press the Vol�me U p or Down Switch to highlight the DI P Switch Test; then,
press the Test Mode Switch to activate. The screen displays a layout of their current settings.
To change a DI P Switch setting, move the switch to the desired setting, then check the screen
to verify that the switch now shows the new setting.
Press Test Mode Switch to return to the Diagnostic Menu.
DIP Switch 2 Table
SW1 SW2
SW3 SW4
sws
SW6 SW7
SW8
NOT USED OFF*
ON
MOTION OFF OFF*
MOTIN ON ON
UP RIGHT OFF
SIT DOWN ON*
NOT USED OFF* OFF*
ON ON
LINK OFF OFF*
LINK ON ON
NOT USED OFF*
ON
SLAVE OFF*
MASTER
ON
DIP Switch 3 Table
COIN MODE SW1 SW2 SW3 SW4
sws
SW6 SW7 SW8
USA1 OFF OFF OFF OFF OFF OFF
OFF
GERMAN1 ON OFF OFF OFF OFF OFF
OFF
FRENCH1 OFF ON OFF OFF OFF OFF OFF
CANADA1 ON ON OFF OFF OFF OFF OFF
SWISS1 OFF OFF ON OFF OFF OFF OFF
ITALY1 ON OFF ON OFF OFF OFF OFF
UK1 OFF ON ON OFF OFF OFF
OFF
SPAIN1 ON ON ON OFF OFF OFF
OFF
AUSTRALIA1
OFF OFF
OFF
ON
OFF OFF
OFF
JAPAN1
ON
OFF OFF
ON
OFF OFF
OFF
TAIWAN1
OFF ON OFF ON OFF OFF OFF
AUSTRIA1
ON ON OFF ON OFF OFF OFF
BELGIUM1 OFF OFF ON ON OFF OFF OFF
CHILE1 ON OFF ON ON OFF OFF OFF
MEXIC01 OFF ON ON ON OFF OFF OFF
ARGENTINA1 ON ON ON ON OFF OFF OFF
SWEDEN1 OFF OFF OFF OFF ON OFF OFF
FINLAND1 ON OFF OFF OFF ON OFF
OFF
NETHERLAND1
OFF
ON
OFF OFF
ON OFF
OFF
NORWAY1 ON ON OFF OFF ON OFF OFF
DENMARK1 OFF OFF ON OFF ON OFF OFF
HOLLAND1 ON OFF ON OFF ON OFF OFF
Coin Counter Mode
One Counter OFF*
Two Counters ON
1-11