WARNING
If a fluorescent tube drops and it breaks, it will implode!
Use care in handling.
•
Fluorescent Lamp
Remove five 1 /4" hex-head wood screws holding the plastic strip above marquee glass.
Set strip aside and carefully l ift glass. Store g lass carefully to prevent damage Remove
the fluorescent lamp retainer brackets. G rasp the tube, give it a quarter turn and remove
it from its socket. Careful ly place a new tube into the socket and turn to reinstall.
•
Monitor
We recommend that you read the WARNINGS section thoroughly before beginning this
procedure.
Switch OFF power to the game. Remove the viewing glass and the monitor bezel.
Completely disconnect the monitor from all of its cabl ing, including its chassis ground
strap.
·
Remove the six flange nuts securing the monitors mounting flanges to its mounting
panel . Pull the monitor carefu l ly from the cabinet front.
fficAUTION
While removing the four flange nuts, firmly support
the monitor from the front of the CRT so that it will not slip.
fficAUTION
The monitor DOES NOT contain an isolation
transformer in its chassis. It is mounted instead in the Power Chassis
Assembly locate on the floor of the Cabinet. When servicing the monitor
on a test bench, YOU MUST /SOLA TE THE MONITOR FROM THE LINE
VOLTAGE WITH AN /SOLA TION TRANSFORMER.
1-6
Summary of Contents for CRUIS'N USA
