Midway 40272, Game Operations Manual

Page: 46 / 93

Control Pod, Buttons and Shifter Service
To service a Start or Radio Button...
Refer to the Control
Pod,
and illustration.
Switch off the power to the game machine and unplug the AC cord.
3 Remove the Dashboard. Refer for Dashboard.
Gently remove the bulb(s) from the socket using a rocking motion.
Perform the desired repair or equipment replacement. NOTE: If changing a bulb, simply
reseat it in original socket. If repairing a button, unscrew the ring at the base and remove
the button.
Re-install the Dashboard and fasten
place with the screws provided.
To service View Buttons.. .
Refer to the Control Pod, Buttons and Shifter Service Illustration.
Switch off the power to the game machine and unplug the AC line cord.
Remove the 4 tamper-resistant buttons used to fasten the faceplate.
Pull the plate forward enough to expose the switches.
Label and disconnect the wiring for the pod(s) being serviced.
Lift assembly completely out of the pod and set aside.
4 Perform the desired repair or equipment replacement.
Reconnect
and re-install buttons. NOTE:
the edge of the button
then the right edge s e a t .
Check for pinched wires.
Fasten the faceplate with the screws provided.
9