Midtronics JLR EXP-1080 Instruction Manual Download Page 7

Midtronics B.V.     Hoofdveste 6 - 8     Houten NL

www.midtronics.com

7

EXP-1080 JLR

Chapter 2: Description 

Display and Keypad

The keypad and display work together to help you quickly 

find and use the right tools at the right time. The display 

also keeps you on track with on-screen navigation aids, 

directions and messages. 

  

Internal Batteries Status Indicator

This indicator appears in the screen’s top left corner,  lets 

you know the status and charge level of the analyzer’s six 

1.5-volt batteries. The X in the top left corner of the screen 

shows that the analyzer is powered by the battery you’re 

testing to conserve the analyzer’s internal batteries. 

  

Voltmeter

When you first connect the analyzer to a battery it functions 

as a voltmeter. The voltage reading appears above the left 

softkey until you move to other menus or functions.

  

Softkeys

Press the two softkeys linked to the bottom of the 

screen to perform the functions displayed above them.  

The functions change depending on the menu or test 

process. So it may be helpful to think of the words appearing 

above them as part of the keys. Some of the more common 

softkey functions are SELECTBACK, and END.

  

POWER

 

Key

Press the POWER button to turn the analyzer on and 

off. The analyzer also turns on automatically when you 

connect its test leads to a battery.

  Title Bar

The title bar shows you the name of the current menu, 

test tool, utility, or function.

  

Selection

 

Area

The selection area below the Title Bar contains selectable 

items or dialog boxes that display information or require 

a response.

  Menu Screen Arrows

When displayed in menu screens, the menu screen 

arrows show you which ARROW key on the keypad to 

press to display other icons or screens. The Up and Down 

Menu Screen Arrows, for example, indicate when to 
press the UP ( ) and DOWN ( ) ARROW keys to display 

the screens above and below the current screen.  
The Left and Right Menu Screen Arrows tell you when to 
use the LEFT ( ) or RIGHT ( ) ARROW keys to select an 

icon.
When displayed under a list of options, the menu screen 

arrows show you which keypad  arrow to press to 

highlight a character or item in a list.

  

Scroll

 

Bar

Another navigational aid is the scroll bar on the right 

side of the screen. The position of its scroll box shows 

you whether the screen is the top (or only screen), 

middle, or last in a series.

  

ARROW

 

keys

Press the UP ARROW key to move up to the next 

selectable item or row. When entering text, use the UP 

ARROW key to move to the previous character.

Summary of Contents for JLR EXP-1080






















Reviews: