Midtronics JLR EXP-1080 Instruction Manual Download Page 16

Midtronics B.V.     Hoofdveste 6 - 8     Houten NL

www.midtronics.com

16

EXP-1080 JLR

Chapter 8: Utility Menu

The Utility Menu allows you to easily set up your analyzer:

Config Tester

TIME :

9:07

MODE :

24 HOUR

DATE :

01/10/2013

FORMAT :

/

MM/DD/YYYY

TEMP. UNITS :

°C

WRITE FAIL :

ASK

Time

1.  Use the LEFT/RIGHT ARROW keys to highlight the hour 

or minutes. To rapidly scroll, hold down an ARROW key.

9

: 07

AM

2.  Press the 

SAVE

 softkey to save your setting or BACK to 

return to the ADJUST screen.

Mode

Use the 

LEFT/RIGHT ARROWS

 to select the option of your 

choice.
1.  Select the 24-hour or AM/PM mode
2.  Press the OK softkey to save your setting

Date

Date cannot be changed.

Format

Use the 

UP/DOWN ARROWS

 to select the desired option.

1.  MM/DD/YYY (month/day/year) or DD/MM/YYY (day/

month/year)

2.  Press the OK softkey to save your setting.

Temperature Units

Use the 

LEFT/RIGHT ARROWS

 to select either Celsius or 

Fahrenheit as temperature indication.

Write Fail

After each measurement the test results are stored on the 

data card. In case the data cannot be stored on to the card 

you can select the way this is notified to the operator.
 

ASK (operator is asked if it is ok to continue even when 

results are not stored)

 

FORCE (measurements can only continue when data 

card is entered)

 

IGNORE (measurement is not stored and operator not 

notified)

Display

The LCD OPTIONS utility enables you to adjust the contrast 

of the text on the display and the backlight time.

Contrast Level

The contrast level is 0 (lightest) to 10 (darkest).  To change it:
1.  Press the 

UP

 or 

DOWN ARROW

 to highlight the op-

tion. 

CONTRAST LEVEL

10

BACKLIGHT TIME

60

2.  Press the 

LEFT/RIGHT ARROW 

key to display the op-

tion’s numerical scroll box.

10

(1-10)

3.  Press the 

UP/DOWN ARROW

 keys to select your pref-

erence.

4.  Press the 

SAVE

 softkey to save your setting or the BACK 

softkey to return to the CONTRAST LEVEL screen without 

saving the changes.

Backlight Time

Backlight time is from 0 to 60 seconds. To change it:
1.  Press the 

UP

 or 

DOWN ARROW

 to highlight the op-

tion. 

CONTRAST LEVEL

10

BACKLIGHT TIME

60

2.  Press the 

LEFT/RIGHT ARROW 

key to display the op-

tion’s numerical scroll box.

60

SEC

Chapter 8: Utility Menu

Summary of Contents for JLR EXP-1080






















Reviews: