Midtronics B.V. Hoofdveste 6 - 8 Houten NL
www.midtronics.com
18
EXP-1080 JLR
Chapter 8: Utility Menu
Update
As software updates become available you’ll be able to use
this utility to update the Tester software using files on an SD
card. The use of a special formatted disk is required for this
action.
FIRMWARE (use this option when new software
becomes available from Midtronics)
SAVE CONFIG (the tester will store the workshop address
to the data card, file name is CONFIG.CSV)
LOAD CONFIG (after new software is uploaded you can
reload the workshop details to the tester)
1. Connect the tester to a 12V battery to ensure the tester
does not switch off during the proces
2. Insert the disc in the tester
3. Select one of the options and follow the instructions on
the screen
4. When finished the tester will prompt you to remove the
card and reboot the tester
Battery List (for QC Mode)
In this function you can add, delete battery information that
is used for the various battery tests.
BATTERY LIST
From this menu you can add or delete batteries that
you can select in the QC mode. When you add a battery
you must have the BATTERY TYPE, BATTERY RATING,
BATTERY CCA, BATTERY CAPACITY
IMPORT LIST
When VW delivers new battery information it can be
uploaded with this function. It will have the same effect
as the above mentioned steps but than in a more simple
way.
EXPORT LIST
To view the current battery and partnumber information
use the EXPORT function to send the information to the
data card.
Summary of Contents for JLR EXP-1080
Page 2: ......