16
17
midstreamlighting.com call +44 (0) 207 584 8310
MODUS R 1000 INSTALLATION GUIDANCE
DRIVER
OUTPUT
CABLE
DRIVER
INPUT
CABLE
TO LID
OUTPUT CABLE
(to floodlight)
DRIVER
INPUT
CABLE
TO LID
7. Floodlight connection
Connecting the WAGO terminals
Connect the YELLOW-GREEN wire to the 5-way WAGO terminal.
Connect the BROWN wire to the WAGO terminal that has already a brown wire with a “+” sticker. Connect the BLUE
wire to the WAGO terminal that has already a blue wire with a “-” sticker.
Connect the YELLOW-GREEN wire to the 5-way WAGO terminal. Close the void position as well, even if there is no
wire connected.
51
60
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
DRIVER
OUTPUT
CABLE
DRIVER
INPUT
CABLE
OUTPUT CABLE
(to floodlight)
MAINS CABLE
TO LID
Remove the cable sheath for a length of 60 mm, expose
the conductor for 9 mm and insert the mains cable
through the cable gland through the cable gland labelled
with "POWER IN" sticker.
Connect the BROWN wire to the 2-way WAGO terminal
that has already a brown wire with an 'L' sticker.
Connect the BLUE wire to the 2-way WAGO terminal that
has already a blue wire with an 'N' sticker. Tighten the
M20 cable gland (torque: 8 Nm).
8. Power supply connection
Driver Junction Box
Driver Junction Box
Driver Junction Box
