Midstream Modus R 1000, Instruction Manual

Page: 7 / 13

12 13
midstreamlighting.com call +44 (0) 207 584 8310 MODUS R 1000 INSTALLATION GUIDANCE
Connect the plug and socket
Connect the plug to the socket. The arrow on the plug and the arrow on the socket must face each other.
Secure the connection
Rotate the outer part of the socket clockwise, then
push the red clip to the locked position to secure the
connection. If unlocking is required, use a screwdriver to
pull the clip to an unlocked position.
Warning
Do not pull the cables during installation. Do not bend the
cables more than the minimum bending radius - 5 to 8
times of the diameter of the cable.
SCALE 1:2
SEE DETAIL
A
Connecting the WAGO terminals
Insert the cable with the connector through the cable gland and connect its wires to the wago terminals as follows:
BROWN (+)

wire that has the + sticker
BLUE (-)

wire that has the - sticker
YELLOW&GREEN (GND)

YELLOW&GREEN wire
Firmly tighten the cable gland, close the junction box lid, and mount the junction box cover back in position. Make sure
everything is properly tightened.
7a. Floodlight connection with an IP68 connector 7a. Floodlight connection with an IP68 connector
The cable with the
IP68 connector
To the lid
Floodlight Junction Box