Midland CT990 instruction guide
| 15
Dual Watch function (DUAL WATCH) - Menu Utilities 21
Dual watch allows to monitor two channels at the same time.
To activate/deactivate the function:
In Standby mode press
Menu Uti 21
; the display will show “
DUAL
WATCH
”.
Push
Menu
to enter the function. Press
▼
/
▲
or rotate the encoder to select
ON/OFF
.
Confirm your selection with the
Menu
button and press
Back
to return to
standby mode.
Beep tone (BEEP) - Menu Utilities 22
When this feature is enabled, everytime a button is pressed you will hear a
beep tone.
In Standby mode press
Menu Uti 22
; the display will show “
KEY TONE
”.
Push
Menu
to enter the function. To activate/deactivate the beep tone press
▼
/
▲
or turn the encoder, then confirm your selection by pushing
Menu
. To
return to standby mode, push
Back
.
Voice function (VOICE) - Menu Utilities 23
In Standby mode press
Menu Uti 23
; the display will show “
VOICE
”.
Push
Menu
to enter the function. Press
▼
/
▲
or rotate the encoder to select
ON/OFF.
Confirm your selection with the
Menu
button and press
Back
to return to
standby mode.
FM radio interruption (FM INTERRUPT) - Menu Utilities 24
When this function is enabled, as soon as CT990 detects a signal in VHF/UHF
the FM radio will be interrupted to listen to VHF/UHF frequencies.
FM radio will resume some seconds after the signal disappears.
In Standby mode press
Menu Uti 24
; the display will show “
FM
INTERRUPT
”.
Push
Menu
to enter the function. Press
▼
/
▲
or rotate the encoder to select
OFF/ON
; Confirm your selection with the
Menu
button and press
Back
to
return to standby mode.
